# Federal Pacific Panel in an Older Tampa House | Titan Plumbing & Electric

> How to read a Federal Pacific or Stab-Lok label, what CPSC actually published, and what a permitted panel replacement in Tampa includes.

Canonical HTML: https://www.titanplumbingandelectric.com/blog/federal-pacific-panel-tampa/

![](/images/shared/hero-bg.webp)

# Federal Pacific Panel in an Older Tampa House

Electrical November 2026

![Breaker box and feeder upgrade on a Titan electrical job in Tampa. This photo is not labeled as a Federal Pacific panel.](/work-map/img/LZ3BElJia8-lg.webp "Breaker box and feeder upgrade on a Titan electrical job in Tampa. This photo is not labeled as a Federal Pacific panel.")

A Federal Pacific panel is a specific box, not a nickname for any old breaker. In Tampa the label is usually on the inside of the door in a garage, a utility closet, or on an exterior wall. If it says Federal Pacific, FPE, or Stab-Lok, that is the panel people are asking about. The photo at the top is a breaker box and feeder upgrade from a Titan job in Tampa. It is a real job photo. It is not a labeled Federal Pacific panel, and we are not presenting it as one.

The work that follows a confirmed label is on the [circuit breaker panel](/electrical/circuit-breaker-panel/) page. This post is how to identify the box and what the public record actually says.

## How do you tell it is a Federal Pacific panel?

Open the hinged door. Leave the deadfront, the metal plate over the breakers, screwed on. The manufacturer label is pasted or riveted to the door or to the back of that opening.

Read the words. Federal Pacific. FPE. Stab-Lok. Those are the marks. A Square D, Eaton, or Siemens label is a different panel, even if the house is old. One odd breaker in a row can be a later replacement. The panel name is the label on the can, not the newest switch someone added.

![Diagram of a panel door with a Federal Pacific Stab-Lok label on the inside](/images/blog/federal-pacific-label.svg)

Take a photo in daylight, with the door open and the deadfront still on. That photo is enough for us to tell you whether the next step is a [panel replacement](/electrical/circuit-breaker-panel/) or a different repair. Do not remove the cover to get a better picture. Bus bars are live.

Older Tampa houses, Seminole Heights bungalows and ranch houses in Carrollwood and Temple Terrace among them, are where we still get these calls. We are not publishing a count of how many are left. The way to know about your house is the label, not the year it was built. We do not have a sourced year range that belongs in this post, so we are not inventing one.

A home inspector’s 4-point form sometimes names the panel. The form is a note. It is not a permit and it is not a repair. What that inspection is for is covered in [the Florida 4-point inspection post](/blog/4-point-inspection-florida-tampa/).

## What does a two-pole breaker mean on this panel?

The 1983 CPSC investigation focused primarily on two-pole residential breakers made before Reliance Electric acquired Federal Pacific in 1979. A two-pole breaker is the double-wide switch that feeds a 240-volt load, such as a range, a dryer, or a central air conditioner. It is still a breaker in this panel. It is not a part you match at a hardware store and stab into the bus. The release is about that class of breaker. It is not a room-by-room list of what you may keep using.

Photograph three things and stop. The inside of the door, so Federal Pacific, FPE, or Stab-Lok is readable. The wall around the panel, so we can see whether a new can fits the same opening. The meter outside, so we know whether the utility has to open the socket. Leave the deadfront screwed on for all three. A catalog number on the door helps us order the right replacement. An amp figure on the door is the service the label claims. We confirm it on site. A blurry photo is not a quote.

On the visit we read the label, trace the feeder, and check whether this can is the service equipment or a subpanel fed from another box. Those are different jobs. A garage subpanel can be this brand while the meter panel is a different make. The door photo usually sorts that before the truck rolls, which is why we ask for it when you call.

## Why do people talk about a risk?

Because the U.S. Consumer Product Safety Commission wrote about these breakers, and because the writing is easy to overstate.

On March 3, 1983, CPSC announced it was closing a two-year investigation of Federal Pacific Electric Stab-Lok residential circuit breakers. The reason in the release: the data available to the Commission did not establish that the breakers pose a serious risk of injury to consumers. CPSC testing had confirmed that the breakers failed certain Underwriters Laboratories calibration tests. The investigation focused primarily on two-pole residential breakers made before Reliance Electric acquired FPE in 1979. The Commission said it could not, at that time, link those calibration failures to a hazardous situation, and that staff did not have enough data to accept or refute the manufacturer’s position. Source: [CPSC, March 3, 1983](https://www.cpsc.gov/Newsroom/News-Releases/1983/Commission-Closes-Investigation-Of-FPE-Circuit-Breakers-And-Provides-Safety-Information-For-Consumers).

A note added to that release on February 18, 2011 tells electricians, homeowners, inspectors, and agents to read it carefully. The note says the Commission closed the matter without making a determination as to the safety of FPE circuit breakers or the accuracy of the manufacturer’s position.

In 2019, CPSC’s acting chairman answered a congressional question for the record. Staff had identified 32 incident reports from 1995 through 2018 positively associated with Federal Pacific Electric Stab-Lok breakers. Eleven of those 32 were reported after 2011. Staff said the incident data had not changed enough to warrant another investigation, and that staff would keep watching. Source: the [April 9, 2019 questions for the record](https://www.congress.gov/116/meeting/house/109316/witnesses/HHRG-116-IF17-Wstate-BuerkleA-20190409-SD001.pdf).

![Diagram of the 1983 CPSC close, the 2011 note, and the 2019 count of 32 incident reports](/images/blog/federal-pacific-cpsc.svg)

That is the public record we are willing to cite. We are not adding a fire percentage, a failure rate, or a recall. The 1983 release is a closed investigation, not a recall notice. If a website gives you a dramatic number and no document, treat the number as unpublished.

A warm cover, a buzzing panel, or a smell of hot plastic is a reason to stop using that circuit and call. Those signs are not unique to this brand. The same advice is on [signs your electrical panel needs an upgrade](/blog/signs-your-electrical-panel-needs-an-upgrade-dont-ignore-these/). Monday through Saturday. Closed Sunday. If you see flame, leave and call 911 before you call an [electrician](/electrical/).

## What about insurance?

We do not speak for your carrier. We will not tell you that a Federal Pacific panel will be covered, dropped, or non-renewed. Ask the company that writes the policy, and get the answer in writing if a renewal is coming up.

A 4-point inspector may list the brand. Listing it is not the same as a claim decision. Replacing the panel produces a permit and a final inspection, which is the paperwork a buyer or a carrier usually asks to see. Whether they require it is their rule, not ours.

## Does the whole panel have to come out?

On our jobs, yes. The product is the panel and the breakers as a set. We replace the panel under a permit. We do not stock a “just the breakers” repair for this brand, and we do not install used breakers pulled from another house.

The choice between a repair and a replacement on other panels is a different article: [repair or replace a circuit breaker panel](/blog/repair-or-replace-a-circuit-breaker-panel-which-is-best-for-you/). When a service is undersized for what the house now runs, the timing question is in [when a panel upgrade is needed](/blog/panel-upgrade-when-needed/). A Federal Pacific label is its own reason to plan the replacement, separate from whether you are adding an air conditioner or a charger.

![Diagram of the steps in a permitted panel replacement, with no price and no duration](/images/blog/federal-pacific-replacement.svg)

The [circuit breaker panel](/electrical/circuit-breaker-panel/) page is where the scope lives: the new panel, the permit, and the inspection. This post does not repeat a price. Published market ranges on the other panel article are national list prices, not a Titan quote. You get a flat rate after we see the panel and the path for the feeder.

## Does the replacement need a permit and an inspection?

Yes. Changing the service equipment is permitted electrical work. Titan pulls it under Florida electrical contractor license EC13012958. The city or the county inspects it. The utility has to release the meter when the job needs a disconnect. We coordinate that. You should not pull the meter yourself.

We are not printing a clock time. A straight panel swap and a job that also moves the mast or waits on the utility are not the same afternoon. Anyone who quotes you a duration before seeing the wall is guessing. We will tell you the sequence after the visit, including how long the power is expected to be off, and we will not pretend the utility’s window is ours.

## What should you do until it is replaced?

![Diagram of what to do and what not to do before a Federal Pacific panel is replaced](/images/blog/federal-pacific-until.svg)

Leave the cover on. If a breaker trips and will not stay on, leave it off. Resetting it over and over is how a fault stays in the wall. Unplug the heavy loads on that circuit if you can do that without touching the panel.

Do not buy a breaker online and have a handyman stab it in. The label is the identification. The repair is a permitted panel.

If the cover is warm or you smell heat at the breakers, call (813) 933-8010. Monday through Saturday. Closed Sunday. Send the door photo when you call so we know whether we are looking at this panel or a different one.

We do not do fire certification. If a fire official or an insurer asks for that, it is a different license than EC13012958. We will say so rather than stretch the electrical permit into a fire-protection document.

## Common questions

### How do I know if my Tampa panel is Federal Pacific?

Open the door, not the deadfront, and read the label. Federal Pacific, FPE, or Stab-Lok on that label is the identification. A breaker brand printed on one switch is not the same thing as the panel name.

### Did CPSC recall Federal Pacific Stab-Lok breakers?

The March 3, 1983 CPSC release says the Commission closed its investigation because the data it had did not establish a serious risk of injury. A 2011 note on that release says the close was made without a safety determination. We do not describe that as a recall.

### Will my insurance pay to replace it?

We do not know, and this post does not promise coverage or a non-renewal. Ask the carrier what it wants in writing. A 4-point inspection can note the panel. The note is not the replacement.

### Can you change only the breakers?

On a Titan job, a Federal Pacific panel is a panel replacement under a permit, not a handful of used breakers. The scope is on the circuit breaker panel page. We do not publish a price or an hour count here.

### Who pulls the permit?

Titan pulls electrical permits under EC13012958. A service change is inspected. Call (813) 933-8010. Monday through Saturday. Closed Sunday.

[Expert Tip from Joe](/about/joe/)

[![Joseph Ferrantegennaro, Founder, Titan Plumbing & Electric](/images/team/joe-ferrantegennaro.webp)](/about/joe/)

Photograph the label on the inside of the door and send it with the call. Do not take the metal cover off the breakers yourself.

[Joseph Ferrantegennaro](/about/joe/) · Founder, Titan Plumbing & Electric

Need help with this?

Talk to a real Tampa dispatcher.

Same-day service, flat-rate pricing, A+ BBB rated.

[Call (813) 933-8010](tel:+18139338010) [Request Service](/contact/)

#### On this page

#### Related Electrical

-    [![Diagram showing City of Tampa, Hillsborough County, Pinellas County, and Pasco County each use a different generator permit portal](/images/blog/generator-permit-counties.svg)Generator Permit in Hillsborough, Pinellas, and Pasco November 2026](/blog/generator-permit-hillsborough-pinellas-pasco/)
-    [![Old cloth wiring in a Tampa attic](/images/pages/electrical-wiring-tampa-cloth-attic.webp)Burning Smell From an Outlet: What to Do Tonight September 2026](/blog/burning-smell-from-outlet-what-to-do/)
-    [![Titan electrician crew and service vans in Tampa](/images/pages/tampa-electrician-crew-service-vans.webp)How to Check a Tampa Electrician License Before You Hire September 2026](/blog/check-tampa-electrician-license/)

Need it fixed today?

Talk to a real Tampa dispatcher.

family-owned, Tampa-based · Same-day service

[(813) 933-8010](tel:+18139338010) [Request Service](/contact/)

## Find Us in Tampa

Our office is at 8407 N Mitchell Ave in Tampa. We serve homeowners and businesses throughout Tampa Bay. Hillsborough, Pasco, and Pinellas counties.

[](https://www.google.com/maps/search/?api=1&query=Titan%20Plumbing%20and%20Electric%208407%20N%20Mitchell%20Ave%20Tampa%20FL%2033604)[View on Google](https://www.google.com/maps/search/?api=1&query=Titan%20Plumbing%20and%20Electric%208407%20N%20Mitchell%20Ave%20Tampa%20FL%2033604)

Titan Plumbing & Electric

-   8407 N Mitchell Ave  
    Tampa, FL 33604
-   [(813) 933-8010](tel:+18139338010)
-   Mon-Sat: Same-day service  
    Sun: Closed

Need it fixed today?

Talk to a real Tampa dispatcher.

Same-day service · Flat-rate pricing · A+ BBB

[Call (813) 933-8010](tel:+18139338010) [Get Directions](https://www.google.com/maps/dir/?api=1&destination=8407%20N%20Mitchell%20Ave%2C%20Tampa%2C%20FL%2033604)
